Allevi 2
The Original Desktop 3D Bioprinter
Pneumatic Extrusion
The Allevi 2 is built around a compressed air pneumatic system, making it very easy to achieve clean starts and stops in printing. Pressure ranges between 1 and 120 PSI accommodate a wide range material viscosities.
RT – 160˚ C
Temperature Control
With temperature control from room temperature to 160° C, the Allevi 2 bioprinter is able to print a wide range of bioinks and cells including gelatin methacrylate, PCL, PLGA, Hyperelastic Bone, fibroblasts, and mesenchymal stem cells (hMSC)– just to name a few.
Photocuring
With the Allevi 2 bioprinter you can choose to cure biomaterials in either visible or ultraviolet light, using LAP or another photoinitiator. We will build the printer to your specification when you buy – 405nm crosslinking LEDs are standard, with 365nm as an alternate option.
UV or Blue Light
TECHNICAL SPECIFICATIONS
-
Extruders 2
-
Photocuring LED – 405nm standard, 365nm option
-
Printing Technology Fused Deposition Manufacturing (FDM)
-
Compatible Syringes 10 mL plastic, 10 mL metal
-
Min. Temp Ambient
-
Max. Temp 160˚ C, 70˚ C 1
-
Min. Pressure 1 PSI
-
Max. Pressure 120 PSI
-
Pressure Variance ±1 PSI
-
Construction Aluminum Frame
-
X, Y Precision 5 μm
-
Z Precision 1 μm
-
Build Volume (W × H × D) 3.5 × 2.4 × 5.1 in (42.8 in³)
-
Build Volume Metric (W × H × D) 9 × 6 × 13 cm (702 cm³)
-
Supported Build Plates Slide, Petri Dish, Well Plate
-
Dimensions (W × H × D) 12.3 × 12.2 × 12.1 in
-
Dimensions Metric (W × H × D) 31.3 × 31.1 × 30.8 cm
-
Weight 19 lbs (8.6 kg)
-
Power Requirements AC 110V – 220V
1 160˚ C on extruder 1 only.